THIS KEY WILL ONLY WORK FOR YOUR VEHICLE IF YOUR KEY HAS A DOT STAMPED ON THE BLADE. 2010 TOYOTA 4-RUNNER Key must be cut and programmed before it will work for your vehicle. Cutting and programming can be performed at an automotive locksmith shop or your local dealership. There are no onboard programming instructions available for 2010 TOYOTA 4-RUNNER chip key. Only a professional with special tools can make it work for your vehicle.

THIS KEY WILL ONLY WORK FOR YOUR VEHICLE IF YOUR KEY HAS A G STAMPED ON THE BLADE.2010 TOYOTA 4-RUNNER Key must be cut and programmed before it will work for your vehicle. Cutting and programming can be performed at an automotive locksmith shop or your local dealership. There are no onboard programming instructions available for 2010 TOYOTA 4-RUNNER chip key. Only a professional with special tools can make it work for your vehicle.

THIS KEY WILL ONLY WORK FOR YOUR VEHICLE IF YOUR KEY HAS A G STAMPED ON THE BLADE.A 2010 Toyota 4-Runner Key must be cut and programmed before it will work for your vehicle. Cutting and programming can be performed at a local automotive locksmith or dealership. There are no onboard programming instructions available for the 2010 Toyota 4-Runner chip key. Only a professional with special tools can make it work for your vehicle.

The 2010 Toyota 4-Runner remote key must be cut and programmed before it will work for your vehicle. Cutting and programming can be performed at a local automotive locksmith or dealership. There are no onboard programming instructions available for 2010 Toyota 4-Runner This remote key comes with a new battery Installed and is tested for functionality before sending.

A 2010 Toyota 4-Runner smart key will need to be programmed to your vehicle before it will work for you. Programming can only be done at a local automotive locksmith or dealership, where they will also be able to cut the emergency key blade to match your original. There are no onboard programming instructions for 2010 Toyota 4-Runner smart keys. They can only be programmed using special diagnostic equipment. This smart key comes with a brand new battery and is tested for functionality before sending. This Smart key comes with 3 buttons and if you look on the back of the unit, you may see some of these numbers: HYQ14ACX - 1551A-14ACX - 315 Mhz . Use these numbers to confirm that your Smart key will match this product and that it will work for your vehicle.

This CR1632 Battery will replace the old one from your 2010 Toyota 4-Runner Smart key, Please make sure you have this CR1632 number on the old battery, if you have no battery available in your remote, you may find the battery number on the back cover of your 2010 Toyota 4-Runner Smart key, Please gave us a call if you have not found any numbers on your remote.