You are able to program 2010 FORD EXPLORER Key by yourself if you have two original working keys that start your vehicle. The new key will first need to be cut to match your original at an automotive locksmith or the dealership. Once the chip key is cut, you can use the printed programming instructions that we send to make the key work for your vehicle. The instructions are very easy to understand and can be performed in less than a minute. If you only have one or you lost all working key for 2010 FORD EXPLORER , the programming can only be done at the locksmith or dealership that cuts the key for you.

You are able to program a 2010 Ford Explorer Key by yourself if you have two original working keys that start your vehicle. The new key will first need to be cut to match your original at a local automotive locksmith or dealership. Once the chip key is cut, you can use the printed programming instructions that we send to make the key work for your vehicle. The instructions are very easy to understand and can be performed in less than a minute. If you only have one or you lost all working key for a 2010 Ford Explorer , the programming can only be done at the locksmith or dealership that cuts the key for you.

You are able to program 2010 FORD EXPLORER Remote key by yourself if you have two working keys (or keys that start the vehicle). The new remote key will first need to be cut to match your original at an automotive locksmith or the dealership. Once the remote head key is cut, you can use the printed programming instructions that we send to make the remote key work for 2010 FORD EXPLORER. The instructions are very easy to understand and can be performed in less than a minute. If you only have one or you lost all working key for the vehicle, the programming can only be done at the locksmith or dealership that cuts the key for you. This Remote key comes with New battery installed and is tested for functionality before sending.

You are able to program 2010 FORD EXPLORER Remote key by yourself if you have two working keys (or keys that start the vehicle). The new remote key will first need to be cut to match your original at an automotive locksmith or the dealership. Once the remote head key is cut, you can use the printed programming instructions that we send to make the remote key work for 2010 FORD EXPLORER. The instructions are very easy to understand and can be performed in less than a minute. If you only have one or you lost all working key for the vehicle, the programming can only be done at the locksmith or dealership that cuts the key for you. This Remote key comes with New battery installed and is tested for functionality before sending.

You are able to program a 2010 Ford Explorer remote head key by yourself if you have two working keys (or keys that start the vehicle). The new remote head key will first need to be cut to match your original at an automotive locksmith or the dealership. Once the remote head key is cut, you can use the printed programming instructions that we send to make the remote key work for your 2010 Ford Explorer The instructions are very easy to understand and can be performed in less than a minute. If you only have one working remote head key or you’ve lost all working key for this vehicle, the programming can only be done at an automotive locksmith or dealership. This remote head key comes with a new battery installed and is tested for functionality before sending. This Remote head key comes with 3 buttons and if you look on the back of the unit, you may see some of these numbers: OUCD6000022 - 850K-D6000022 - 315 Mhz . Use these numbers to confirm that your Remote head key will match this product and that it will work for your vehicle.

You are able to program a 2010 Ford Explorer remote head key by yourself if you have two working keys (or keys that start the vehicle). The new remote head key will first need to be cut to match your original at an automotive locksmith or the dealership. Once the remote head key is cut, you can use the printed programming instructions that we send to make the remote key work for your 2010 Ford Explorer The instructions are very easy to understand and can be performed in less than a minute. If you only have one working remote head key or you’ve lost all working key for this vehicle, the programming can only be done at an automotive locksmith or dealership. This remote head key comes with a new battery installed and is tested for functionality before sending. This Remote head key comes with 4 buttons and if you look on the back of the unit, you may see some of these numbers: OUCD6000022 - 850K-D6000022 - 315 Mhz . Use these numbers to confirm that your Remote head key will match this product and that it will work for your vehicle.

The 2010 Ford Explorer remote keyless entry shell is meant for customers who have a working keyless entry that is cracked or broken. Once received, you can remove the remote part from your original 2010 Ford Explorer keyless entry remote and place it into the new shell for normal working functions.

The 2010 Ford Explorer key shell is meant for customers who have a working remote head key that is cracked or broken; you can purchase the shell and place the working remote unit inside. The blade is molded into the plastic head of the shell, so it must be cut to match your original key blade before you can use it. To cut this 2010 Ford Explorer shell, please contact a local automotive locksmith or dealership. The price for cutting this key shell varies depending on your location. Once the new key shell is cut, you can remove the remote part from your original key and place it into the new shell for normal working functions. The new shell will NOT start the vehicle without the original remote part inside of it.

The best way to protect your Ford 4 Button Remote from damage - cracks or scratchs is to use the Rubber Silicone case cover, multi colors are available to match your car for your Ford 4 Button Remote.

The best way to protect your Ford 3 button remote is to fit it with this protective rubber pad.

The best way to protect your Ford 4 Button Remote Head Key from damage - cracks or scratchs is to use the Rubber Silicone case cover, multi colors are available to match your car for your Ford 4 Button Remote Head Key.

This CR2032 Battery will replace the old one from your 2010 Ford Explorer Remote, Please make sure you have this CR2032 number on the old battery, if you have no battery available in your remote, you may find the battery number on the back cover of your 2010 Ford Explorer Remote, Please gave us a call if you have not found any numbers on your remote.